‘Sec. 1. 38 MRSA §1303-C, sub-§6, as amended by PL 2011, c. 655, Pt. GG, §7 and affected by §70, is further amended to read:
(1) As long as the public waste disposal corporation controls the decisions regarding the type and source of waste that is accepted, handled, treated and disposed of at the facility; and
(2) If the facility is a solid waste landfill, the facility accepts only waste that is generated within the State unless the commissioner finds that the acceptance of waste that is not waste generated within the State provides a substantial public benefit pursuant to section 1310-AA, subsection 1-A;
(1) As long as the municipality controls the decisions regarding the type and source of waste that is accepted, handled, treated and disposed of at the facility; and
(2) If the facility is a solid waste landfill, the facility accepts only waste that is generated within the State unless:
(a) The commissioner finds that the acceptance of waste that is not waste generated within the State provides a substantial public benefit pursuant to section 1310-AA, subsection 1-A; and
(b) Acceptance of waste that is not waste generated within the State is approved by a majority of the voters of the municipality by referendum election;
(1) As long as the refuse disposal district controls the decisions regarding the type and source of waste that is accepted, handled, treated and disposed of at the facility; and
(2) If the facility is a solid waste landfill, the facility accepts only waste that is generated within the State unless the commissioner finds that the acceptance of waste that is not waste generated within the State provides a substantial public benefit pursuant to section 1310-AA, subsection 1-A;
(1) Generates at least 85% of the solid waste disposed of at a facility, except that the facility may accept from other sources, on a nonprofit basis, an amount of solid waste that is no more than 15% of all solid waste accepted on an annual basis; or
(2) Is an owner of a manufacturing facility that has, since January 1, 2006, generated at least 85% of the solid waste disposed of at the solid waste facility, except that one or more integrated industrial processes of the manufacturing facility are no longer in common ownership, and those integrated industrial processes will continue to generate waste that will continue to be disposed of at the solid waste facility. This exemption only applies if the source and type of waste disposed of at the solid waste facility remains the same as that previously disposed of by the single entity.
For the purposes of this paragraph, "single entity" means an individual, partnership, corporation or limited liability corporation that is not engaged primarily in the business of treating or disposing of solid waste or special waste. This paragraph does not apply if an individual partner, shareholder, member or other ownership interest in the single entity disposes of waste in the solid waste facility. A waste facility receiving ash resulting from the combustion of municipal solid waste or refuse-derived fuel is not exempt from this subsection solely by operation of this paragraph.
For purposes of this paragraph, "integrated industrial processes" means manufacturing processes, equipment or components, including, but not limited to, energy generating facilities, that when used in combination produce one or more manufactured products for sale; or
For purposes of this subsection, "waste that is generated within the State" includes residue and bypass generated by incineration, processing and recycling facilities within the State or waste whether generated within the State or outside of the State if it is used for daily cover, frost protection or stability or is generated within 30 miles of the solid waste disposal facility.
Sec. 2. 38 MRSA §1303-C, sub-§22-A is enacted to read:
Sec. 3. 38 MRSA §1303-C, sub-§40-A is enacted to read:
(1) The residue is used at a solid waste landfill for daily cover, frost protection or other operational or engineering-related purpose, including, but not limited to, landfill shaping or grading, and such use has been approved by the department under the landfill's license and such use complies with all applicable rules of the department and all applicable conditions of the landfill's license; and
(2) The use of the residue under subparagraph (1) complies with the requirements of section 1310-N, subsection 5-A, paragraph B, subparagraph (2);
(1) The residue does not meet the requirements of paragraph C; and
(2) The residue is generated by the facility only as an ancillary result of the facility's processing operations; and
(1) The residue does not meet the requirements of paragraph C or D;
(2) The residue is not considered recycled under section 1310-N, subsection 5-A, paragraph B, subparagraph (2) and is disposed of at a solid waste landfill; and
(3) The solid waste processing facility is in compliance with the requirements of section 1310-N, subsection 5-A, paragraph B, subparagraph (2).
Sec. 4. 38 MRSA §1310-N, sub-§5-A, ¶B, as amended by PL 2009, c. 412, Pt. A, §1, is further amended by amending subparagraph (2) to read:
(1) An applicant for a new or expanded solid waste processing facility that generates residue requiring disposal shall demonstrate that all requirements of this paragraph will be satisfied. On an annual basis, an owner or operator of a licensed solid waste processing facility that generates residue requiring disposal shall demonstrate compliance with all the requirements of this paragraph. The annual demonstration of compliance must be included as an element of the facility's annual report to the department submitted in conformance with the provisions of subsection 6-D, paragraph B and department rules.
(2) A solid waste processing facility that generates residue requiring disposal shall recycle or process into fuel for combustion all waste accepted at the facility to the maximum extent practicable, but in no case at a rate less than 50%. For purposes of this subsection, "recycle" includes, but is not limited to, reuse of waste as shaping, grading or alternative daily cover materials at landfills; aggregate material in construction; and boiler fuel substitutes the reuse of waste generated within the State as defined in section 1303-C, subsection 40-A, paragraph C; the recovery of metals from waste; the use of waste or waste-derived product as material substitutes in construction; and the use of waste as boiler fuel substitutes.
At least 50% of the waste that a solid waste processing facility characterizes as recycled under this subparagraph must have been reused or recycled by the facility through methods other than placement of the waste in a solid waste landfill, except that a solid waste processing facility that was in operation during calendar year 2018, that accepts exclusively construction and demolition debris and that accepted more than 200,000 tons of such debris in calendar year 2018 shall:
(a) Reuse or recycle at least 15% of such debris through methods other than placement in a solid waste landfill by January 1, 2022; and
(b) Reuse or recycle at least 20% of such debris through methods other than placement in a solid waste landfill by January 1, 2023.
A solid waste processing facility that was in operation during calendar year 2018, that accepts exclusively construction and demolition debris and that accepted more than 200,000 tons of such debris in calendar year 2018 may request and the department may grant a waiver of the applicable provisions of this subparagraph for a specified period of time if the facility is able to demonstrate that compliance with the applicable provisions of this subparagraph would result in an unreasonable adverse impact on the facility. The demonstration may include results of a 3rd-party audit of the facility. In determining whether to grant such a waiver request, the department may consider trends in local, regional, national and international markets; the availability and cost of technologies and services; transportation and handling logistics; and overall costs that may be associated with various waste handling methods.
(3) A solid waste processing facility subject to this paragraph shall demonstrate consistency with the recycling provisions of the state plan.
(4) The requirements of this paragraph do not apply to solid waste composting facilities; solid waste processing facilities whose primary purpose is volume reduction or other waste processing or treatment prior to disposal of the waste in a landfill or incineration facility; solid waste processing facilities that are licensed in accordance with permit-by-rule provisions of the department's rules; or solid waste processing facilities that are exempt from the requirements of the solid waste management rules related to processing facilities adopted by the board.
(5) If the department amends the rules relating to fuel quality for construction and demolition wood fuel and the amendment adversely affects the ability of a solid waste processing facility to meet the 50% standard in subparagraph (2), the department may not enforce the requirements of subparagraph (2) against that processing facility and the department shall submit to the joint standing committee of the Legislature having jurisdiction over natural resources matters a report relating to the rule change. The joint standing committee of the Legislature having jurisdiction over natural resources matters may submit legislation related to the report.
The department shall adopt rules to implement the provisions of this paragraph. Rules adopted pursuant to this paragraph are routine technical rules as defined in Title 5, chapter 375, subchapter 2-A.
Sec. 5. 38 MRSA §1310-N, sub-§11, as enacted by PL 2007, c. 414, §3, is amended to read:
Sec. 6. 38 MRSA §1310-AA, sub-§1-A, as amended by PL 2011, c. 566, §2, is further amended to read:
(1) Section 1303-C, subsection 6, paragraph A-2;
(2) Section 1303-C, subsection 6, paragraph B-2; or
(3) Section 1303-C, subsection 6, paragraph C-2.
Sec. 7. 38 MRSA §1310-AA, sub-§2, as amended by PL 2011, c. 566, §3, is further amended to read:
Sec. 8. 38 MRSA §1310-AA, sub-§3, as amended by PL 2011, c. 566, §§4 and 5, is further amended to read:
Sec. 9. Department of Environmental Protection; 2024 update to state waste management and recycling plan. The Department of Environmental Protection shall include in its 2024 update to the state waste management and recycling plan required under the Maine Revised Statutes, Title 38, section 2122 an evaluation of and any recommendations concerning the provisions of Title 38, section 1310-N, subsection 5-A, paragraph B, subparagraph (2) and whether amendments to those provisions are necessary.’