LD 1435
pg. 5
Page 4 of 15 An Act Establishing Minimum Energy Efficiency Standards for Certain Products So... Page 6 of 15
Download Bill Text
LR 1179
Item 1

 
C.__Has a heat input rate of less than 225,000 BTUs per
hour.

 
25.__Single-voltage external AC-to-DC power supply.__"Single-
voltage external AC-to-DC power supply" means a device that:

 
A.__Is designed to convert line voltage AC input into lower
voltage DC output;

 
B.__Is able to convert to only one DC output voltage at a
time;

 
C.__Is sold with or intended to be used with a separate end-
use product that constitutes the primary power load;

 
D.__Is contained within a separate physical enclosure from
the end-use product;

 
E.__Is connected to the end-use product through a removable
or hard-wired electrical connection, cable, cord or other
wiring;

 
F.__Does not have batteries or battery packs, including
those that are removable, that physically attach directly to
the power supply unit;

 
G.__Does not have a battery chemistry or type selector
switch and indicator light and does not have a battery
chemistry or type selector switch and a state of charge
meter; and

 
H.__Has a nameplate output power less than or equal to 250
watts.

 
26.__State-regulated incandescent reflector lamp.__"State-
regulated incandescent reflector lamp" means a lamp that is not
colored or designed for rough or vibration service applications;
that has an inner reflective coating on the outer bulb to direct
the light, an E26 medium screw base and a rated voltage or
voltage range that lies at least partially within 115 to 130
volts; and that falls into one of the following categories:

 
A.__A bulged reflector or elliptical reflector bulb shape
that has a diameter that equals or exceeds 2.25 inches; and

 
B.__A reflector or parabolic aluminized reflector__or
similar bulb shape that has a diameter of 2.25 to 2.75
inches.


Page 4 of 15 Top of Page Page 6 of 15